Product information "Picobello PREMIUM Repair Kit"
Uses:
Repair lacquered parquet, laminate and furniture easily and effectively yourself: The ideal kit for the lasting repair of scratches, small holes, pressure marks and edge damage. Can be used on parquet, laminate and high-quality furniture as well as on stairs, doors and kitchen fronts. Also suitable for cork floors. The kit contains hard wax as a filler (in various wood colours and base colours for mixing) as well as all the necessary tools. The hard wax filler is very hard and resistant, with a melting point of 81°C (aprox. 177°F), and can be painted over. The colours can be mixed with each other. To seal and protect the repaired area, the AQUA Clear Lacquer Brush Pen is included as a sealing pen. Detailed instructions for use are also included.

Contents:
15 Sticks of Hardwax (assorted wood shades, black, white and transparent)
1x Special Fillers Applicator
1x Battery Melter
1 x Sanding and Polishing Pad
1 x Lint Free Cotton Cloth
1 x AQUA Clear Lacquer Brush Pen: Gloss
1 x Instruction Guide
https://youtu.be/EQatqHCTyV8
To be used:On surface and/or materials:
Deep scratchesWood Window, indoor
Pressure marksWood Doors, indoor
Small holesWood flooring, lacquered
Damaged edgesLaminate flooring
ChipsPlastic surface
Wood surface, lacquered
Cork surface
Kitchen Cabinet and countertops

It‘s just so easy …
Preparation: The area to be repaired has to be clean, dry and free from grease. If necessary, remove any loose or sticking out particles. Choose Colors: Choose matching colors. Take care to apply always several colors from light to dark. With real wood surfaces, always mix colors with Transparent (900) to achieve a depth effect. Melting an Mixing: Activate the melter – the melter tip heats immediately. Melt off small portions of filler and mix together. Filling: Let wax mixture flow into the damage area. Note: Always slightly overfill the area! Levelling: Use the sharp grooves of the Special Fillers Applicator to strip off excess material. Precise Adjustment: For precise adjustment, imitate the grain pattern with a darker hue of filler. Then again, level off excess material with the planer grooves. Degreasing: Use the grey sanding pad to degrease the area. At the same time the gloss sheen of the repair is flattened. Sealing: To protect the repaired area, apply a sealing with the AQUA Brush Pen Clear Lacquer.Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surroundings. If lacquer flow decreases, again squeeze area marked “P/PRESS” and slightly dab brush tip on the Cotton Cloth. After use, wash out brush tip with water and dab dry on a cloth. Sheen Level Adjustment: When the repaired area is dry (after approx. 10-15 minutes at room temperature), the sheen level can be adjusted with the Sanding and Polishing Cloth. The green side of the cloth polishes while the white side reduces the sheen level.

https://www.koenignorthamerica.com/media/08/64/d9/1727416327/G61403_Picobello_PREMIUM-Reparatur-Set_Instructions.pdf

You might also be interested in ...

Hard Wax Filler, 8 cm
$5.95*
Battery Melter
$40.00*
Special Fillers Applicator
$14.95*
Cotton Cloth
$13.20*